Description
VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor,2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.
Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
| FEATURES |
|---|
| – 2.5 Gallon 200 PSI VIAIR Air Tank |
| – 480C Chrome VIAIR Air Compressor w/Thermal Overload Protector |
| – Tire Inflation Gun with 200 PSI Gauge |
| – Dash Panel Gauge with ON/OFF Switch |
| – 30ft. Coil Hose with Quick Connects |
| – Pressure Switch (165 PSI on, 200 PSI off) |
| – Reducer: 1/8” (F) to 1/4” (M) |
| – Reducer: 3/8” (F) to 1/4” (M) |
| – 1/4” Quick Connect Stud (F) |
| – 1/4” Quick Connect Coupler (F) |
| – 1/4” 250 PSI Safety Valve |
| – 1/4” Drain Cock |
| – (3) 1/4” Compression Fittings |
| – 20ft. 12-Gauge Wire with Inline Fuse Holder |
| – 4” Strip of Continuous Grommet Material |
| – Accessory Airline |
| – Electrical Connections |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 100% @ 100 PSI |
| – Max. Working Pressure: 200 PSI |
| – Max. Amp Draw: 23 Amps |
| – Ingress Protection Rating: IP67 |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Reviews
There are no reviews yet.