Description
VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
| FEATURES |
|---|
| – 2.0 Gallon VIAIR Air Tank |
| – (2) 350C VIAIR Compressors w/Thermal Overload Protectors |
| – 30ft. Coil Hose with Quick Connects |
| – Tire Inflation Gun with 160 PSI Gauge |
| – Dash Panel Gauge with ON/OFF Switch |
| – 0-220 PSI Pressure Regulator |
| – Blow Gun Air Tool |
| – Sealed Pressure Switch (110 PSI on, 145 PSI off) |
| – (2) 40-amp Relays |
| – (2) T-Fittings (1/4” (M) x 1/4″ (F) x 1/8” (F)) |
| – 1/4” Quick Connect Stud (F) |
| – 1/4” Quick Connect Coupler (F) |
| – 1/4” 175 PSI Safety Valve |
| – 1/4” Drain Cock |
| – (2) 1/8” BSP to 1/4” NPT |
| – (4) 1/4” Compression Fittings |
| – 20ft. 12-Gauge Wire with Inline Fuse Holder |
| – 4” Strip of Continuous Grommet Material |
| – Accessory Airline |
| – Electrical Connections |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 100% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Amp Draw: 37 Amps |
| – Ingress Protection Rating: IP67 |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Reviews
There are no reviews yet.