Description
VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics.
Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
FEATURES |
---|
– 2.5 Gallon VIAIR Air Tank |
– 325C VIAIR Compressor w/Thermal Overload Protector |
– Dash Panel Gauge with ON/OFF Switch |
– Pressure Switch with Relay (110 PSI on, 145 PSI off) |
– Reducer: 1/8” (F) to 1/4” (M) |
– 1/4” Quick Connect Coupler (M) |
– 1/4” 175 PSI Safety Valve |
– 1/4” Drain Cock |
– 20ft. 12-Gauge Wire with Inline Fuse Holder |
– 4” Strip of Continuous Grommet Material |
– Accessory Airline |
– Electrical Connections |
SPECIFICATIONS |
---|
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 33% @ 100 PSI |
– Max. Working Pressure: 150 PSI |
– Max. Amp Draw: 21 Amps |
– Ingress Protection Rating: IP67 |
All Fittings are NPT rated unless otherwise noted. |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Reviews
There are no reviews yet.