Viair Ultra-Light Duty OBA

$163.99

PERFORMANCE DATA

 

PSI CFM A BAR LPM A
0 1.53 7 0 43.5 7
10 1.00 9 1.0 28.0 9
20 0.95 10 2.0 25.5 11
30 0.90 11 3.0 22.7 11
40 0.83 11 4.0 20.7 12
50 0.77 12 5.0 18.3 12
60 0.72 12 6.0 16.3 12
70 0.65 12 7.0 13.7 12
80 0.60 12 8.0 11.7 12
90 0.54 12 9.0 10.0 11
100 0.48 12

* Supply Voltage: 13.8 Volts

FILL RATES

1.0 GALLON TANK FILL RATE
0 to 105 PSI 1 min. 40 sec. (± 10 sec.)
85 to 105 PSI 30 sec. (± 05 sec.)

 

 

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, air lockers, and a host of other light duty pneumatic needs.  While not intended for tire inflation, this onboard air system provides a reliable air source in a smaller volume, and a cost effective package.

Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs.
Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.

Share this product
Facebook Twitter Pinterest

Recently Viewed Products

Description

FEATURES
– 1.0 Gallon VIAIR Air Tank
– 98C VIAIR Air Compressor
– Omega Bracket with Mounting Hardware
– Pressure Switch (85 PSI on, 105 PSI off)
– 40-amp Relay
– 145 PSI Safety Valve
– T-Fitting: 1/4” (M) x 1/4″ (F) x 1/8” (F)
– T-Fitting: 1/4” (M) x 1/4″ (F) x 1/4” (F)
– 1/4” Drain Cock
– 1/4” Compression Fitting
– 1/4” Plug (M)
– (2) 1/4” (M) NPT to 1/8” (F) BSP
– 20ft. 16 Gauge Wire with Inline Fuse Holder
– Accessory Airline
– Electrical Connections
SPECIFICATIONS
– 12-Volt
– Permanent Magnetic Motor
– Duty Cycle: 10% @ 100 PSI
– Max. Working Pressure: 105 PSI
– Max. Amp Draw: 12 Amps
– Ingress Protection Rating: IP54

All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.

Additional information

Weight 15 lbs

Reviews

There are no reviews yet.

Be the first to review “Viair Ultra-Light Duty OBA”
SKU: 10000 – 105 PSI / 1.53 CFM Category: Tags: , , , , , ,

Related products